1998 Nissan Air and Fuel Delivery Parts


Showing 1 - 10 of 216 products
Image
SKU
Product
Rating
Price

Motorad
  • Fuel Cap
  • Vented Black Cap
  • Standard
  • Product Attributes:
    • Vented: Yes
    • Lockable: No
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Nissan Maxima V 2988 6 Cyl 3.0L 182

Delphi
  • Electric Fuel Pump
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 6
    • Maximum Pressure: 94.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Wiring Harness Included: No
    • Position(s): In-tank
    • System Pressure: 30 Psi
    • Terminal Type: Pin
    • Terminal Gender: Male
    • Average Flow Rating: 26
    • Strainer Included: No
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Nissan Maxima V 2988 In-Tank 6 Cyl 3.0L 182

Delphi
  • Electric Fuel Pump
  • without Low Fuel Warning; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 6
    • Maximum Pressure: 94.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Wiring Harness Included: No
    • Position(s): In-tank
    • System Pressure: 30 Psi
    • Terminal Type: Pin
    • Terminal Gender: Male
    • Average Flow Rating: 26
    • Strainer Included: No
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Nissan Frontier L 2389 In-Tank 4 Cyl 2.4L -

Fram
  • FRAM, CA4309, Air Filter
  • Flexible Panel Air Filter
  • Extra Guard
  • Product Attributes:
    • Reusable: No
    • Shape: Rectangular
    • Flexible or Rigid: Flexible
    • Grade Type: Regular
    • Length: 11.109
    • Washable: No
  • Most dirt in your engine enters through your air filter. That’s why our experts at FRAM® engineering laboratories recommend changing your engine air filter every 12,000 miles.1 After all, a new air filter can increase airflow and horsepower and imve overall engine performance.

This Part Fits the Following OEM/Substitute Numbers:
33-2008, 33-2038, A1129C, A187, A24339, A24633, A780, AF7820, AF954, CA1129, CA4633

Additional Fitment Information:
Vehicle
1998 - Nissan Maxima

Carter
  • Fuel Pump - Electric In Tank
  • without Low Fuel Warning; Includes Hose, Clamps, Grommet, Rubber Sleeeve, Tank Seals, and Wire Harness
  • Product Attributes:
    • Voltage: 12v
    • Minimum Flow Rating: 33.0
    • Negative Ground: Yes
    • Mounting Hardware Included: No
    • Pump Type: Electric
    • Fuel Sending Unit Included: No
    • Length: 114.0
    • Fuel Pump Inlet Type: Strainer
    • Connector Shape: Rectangle
    • Outlet Outside Diameter: 9.0
    • Terminal Quantity: 2
    • Mounting Bracket Included: No
    • Minimum Pressure: 60.0
    • Seal And Lock Ring Included: No
    • Wiring Harness Included: Yes
    • Terminal Type:
      • Blade
      • Spade
    • Terminal Gender: Male
    • Inlet Outside Diameter: 11.0
    • Regulator Included: No
    • Outlet Fitting Thread Size: 1/2
    • Strainer Included: No
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

This Part Fits the Following OEM/Substitute Numbers:
1234663, 152017, 17040-3S500, 17040-3S505, 17040-3S510, 17040-3S515, 17040-5S105, 17040-S3M-A00, 17042-5M015, 17042-7B025, 1W1Z 9H307-BD, 1W1Z 9H307-BG, 2910231, 2910247, 2910313, 2950001, 2950190, 2C2Z 9H307-CB...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Nissan Frontier L 2389 In-Tank 4 Cyl 2.4L -

Motorad
  • Locking Fuel Cap
  • Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: Yes
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Nissan Sentra L 1597 4 Cyl 1.6L 97

Motorad
  • Key Vent Fuel Cap
  • Vented Black Cap
  • Key Vent
  • Product Attributes:
    • Vented: Yes
    • Lockable: No
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 1078-290305, 11501, 12F3PL, 17251F9926, 17501D, 31734, 40900, 4764917AA, 5501, 55010, 5501A, 703-1685, 9MGC900, MGC900, P5501

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Nissan Maxima V 2988 6 Cyl 3.0L 182

GBR Fuel Injection
  • Always replace fuel filter when injector is replaced.
  • Reman Multi Port Fuel Injector
  • GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Nissan Sentra L 1597 4 Cyl 1.6L 97

TI Automotive
  • Stock Replacement Gas Pump Only
  • 500 HP+; 255 lph; Larger Inlet Hole In Center Of Bottom; Gerotor Style; Pump Only
  • Complete hardware kits ensure easy installation and reliable operation. All pumps meet TI Automotive s stringent global OE quality standards.
  • Hi-Performance In-Tank Fuel Pump
  • Features:
    • Universal Intank Fuel Pump
  • TI Automotive is an OE supplier to the major automotive manufacturers around the world. Our industry-leading, award-winning fluid storage, carrying and delivery technology helps global automakers improve fuel economy, performance and emissions. TI Automotive has operations in 29 countries across 6 continents to serve our automotive customers. In fact, two-thirds of vehicles produced around the world contain products from TI Automotive. Our proven technology, built on nearly 100 years of experience enables us to develop world-class fuel systems. You may not be familiar with the TI Automotive brand for stock replacement parts as we've been supplying product to the most popular name brands in the market for decades with a strong legacy of reliability, performance and first-time fit. TI Automotive brings the same level of innovation, quality and performance to the aftermarket, providing OE-quality fuel pump and module technology for gasoline, diesel and flex-fuel applications in a broad and expanding range of vehicles. Pumps are designed for quiet, efficient, low-voltage performance and unsurpassed durability. Award-winning in-tank and in-line pump technology featuring• E85 in-tank models with pumping components validated to OEM specs• Powerful and quiet operating DCSS 39/50 turbine pumps • Positive displacement gerotor pumpsRequired components are included for easy installation. Proudly union made in TI Automotive's Caro, Michigan plant across 5 fuel pump and 14 modules assembly lines. Our fuel pumps and modules are never manufactured or assembled by a third party or sourced from an outside company. Fluid Thinking shapes the mindset of TI Automotive.

Additional Fitment Information:
Vehicle
1998 - Nissan Sentra

TI Automotive
  • Stock Replacement Gas Pump Only
  • 500 HP+; 255 lph; Larger Inlet Hole In Center Of Bottom; Gerotor Style; Pump Only
  • Complete hardware kits ensure easy installation and reliable operation. All pumps meet TI Automotive s stringent global OE quality standards.
  • Hi-Performance In-Tank Fuel Pump
  • Features:
    • Universal Intank Fuel Pump
  • TI Automotive is an OE supplier to the major automotive manufacturers around the world. Our industry-leading, award-winning fluid storage, carrying and delivery technology helps global automakers improve fuel economy, performance and emissions. TI Automotive has operations in 29 countries across 6 continents to serve our automotive customers. In fact, two-thirds of vehicles produced around the world contain products from TI Automotive. Our proven technology, built on nearly 100 years of experience enables us to develop world-class fuel systems. You may not be familiar with the TI Automotive brand for stock replacement parts as we've been supplying product to the most popular name brands in the market for decades with a strong legacy of reliability, performance and first-time fit. TI Automotive brings the same level of innovation, quality and performance to the aftermarket, providing OE-quality fuel pump and module technology for gasoline, diesel and flex-fuel applications in a broad and expanding range of vehicles. Pumps are designed for quiet, efficient, low-voltage performance and unsurpassed durability. Award-winning in-tank and in-line pump technology featuring• E85 in-tank models with pumping components validated to OEM specs• Powerful and quiet operating DCSS 39/50 turbine pumps • Positive displacement gerotor pumpsRequired components are included for easy installation. Proudly union made in TI Automotive's Caro, Michigan plant across 5 fuel pump and 14 modules assembly lines. Our fuel pumps and modules are never manufactured or assembled by a third party or sourced from an outside company. Fluid Thinking shapes the mindset of TI Automotive.

Additional Fitment Information:
Vehicle
1998 - Nissan Sentra
Showing 1 - 10 of 216 products

Loading...