1978 Mercedes Benz Air and Fuel Delivery Parts

Choose a Model for your 1978 Mercedes-Benz


Showing 1 - 10 of 290 products
Image
SKU
Product
Rating
Price

Motorad
  • Locking Fuel Cap
  • Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: Yes
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782

Additional Fitment Information:
Vehicle Block CC Engine CID
1978 - Mercedes-Benz 450SLC V 4520 8 Cyl 4.5L -

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1978 - Mercedes-Benz 230

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1978 - Mercedes-Benz 230

Wix
  • WIX Fuel (Complete In-Line) Filter
  • Metal In-Line Filter
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 1.745
    • Duty Type: Ld
    • Micron: 12.00
    • Flow Rate: 1/2 Gpm
    • Style: Fuel (complete In-line) Filter
    • Class: A
    • Outlet: 1/4
    • Burst Pressure: 60
    • Media Material: Cellulose
    • Outer Diameter Bottom: 1.745
    • Inlet: 1/4
  • WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.

This Part Fits the Following OEM/Substitute Numbers:
0 450 904 159, 0222-23420-A, 0430108, 0430927, 047420, 1058045, 1083832, 1083854, 1133300, 1136300, 1139802, 12902G1, 1492005, 1492137, 16900634004, 187829, 209147, 212...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Region Engine CID
1978 - Mercedes-Benz 230 L 2307 In-Line Canada 4 Cyl 2.3L -

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • When replacing older versions of this filter, (1) 000 091 01 82 or (1) 124 478 04 53 Spacer Tube may be required.

Additional Fitment Information:
Vehicle
1978 - Mercedes-Benz 450SLC

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Chas: A079467-
  • When replacing older versions of this filter, (1) 000 091 01 82 or (1) 124 478 04 53 Spacer Tube may be required.

Additional Fitment Information:
Vehicle Chassis Range
1978 - Mercedes-Benz 280E A079467 and up

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Chas: A020975-
  • When replacing older versions of this filter, (1) 000 091 01 82 or (1) 124 478 04 53 Spacer Tube may be required.

Additional Fitment Information:
Vehicle Chassis Range
1978 - Mercedes-Benz 280CE A020975 and up

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Chas: -A020974
  • When replacing older versions of this filter, (1) 000 091 01 82 or (1) 124 478 04 53 Spacer Tube may be required.

Additional Fitment Information:
Vehicle Chassis Range
1978 - Mercedes-Benz 280CE up to A020974

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Chas: -A079466
  • When replacing older versions of this filter, (1) 000 091 01 82 or (1) 124 478 04 53 Spacer Tube may be required.

Additional Fitment Information:
Vehicle Chassis Range
1978 - Mercedes-Benz 280E up to A079466

Mahle
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Diesel
  • Spin On

Additional Fitment Information:
Vehicle
1978 - Mercedes-Benz 300CD
Showing 1 - 10 of 290 products

Loading...