1974 Honda Air and Fuel Delivery Parts

Choose a Model for your 1974 Honda


Showing 1 - 4 of 4 products
Image
SKU
Product
Rating
Price

Motorad
  • Locking Fuel Cap
  • Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: Yes
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - Honda Civic L 1169 4 Cyl 1.2L 71

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1974 - Honda Civic

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1974 - Honda Civic

K&N
  • SPECIAL ORDER Repl Fltr
  • Round; H-2.5; OD-9 in.; ID-7 1/8 in.
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s 10-Year/Million Mile Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 10.310 In. (262mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: 7.125 In. (181mm)
    • Product Box Width: 3.940 In. (100 Mm)
    • Product Box Length: 10.190 In. (259mm)
    • Outside Diameter: 9.000 In. (229mm)
    • Item Height: 2.500 In. (64mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: None
    • Top Style: Open
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Inner Wire: No
    • Package Contents: 1 Air Filter
    • Top Material: None
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • Overall Length: N/a
    • Shape: Round
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 0.88 Oz (26 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
17220634005, 42909, 87909, A270, A30011, A705C, AF118, CA2788, FA867, RAF104, TA30011

Additional Fitment Information:
Vehicle
1974 - Honda Civic
Showing 1 - 4 of 4 products

Loading...