1974 BMW Air and Fuel Delivery Parts

Choose a Model for your 1974 BMW


Showing 1 - 10 of 32 products
Image
SKU
Product
Rating
Price

Motorad
  • Locking Fuel Cap
  • Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: Yes
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - BMW Bavaria L 2985 6 Cyl 3.0L 182

Fram
  • FRAM, G2, Fuel Filter
  • In-Line Fuel Filter Hoses and clamps included
  • FRAM
  • Product Attributes:
    • Fuel Type: Gasoline
    • Primary Or Secondary: Primary
    • Inlet Outside Diameter:
      • 0.3125
      • 14
    • Mounting Type: Cartridge
    • Outlet Outside Diameter: 0.3125
    • Fitting Type: Cartridge

This Part Fits the Following OEM/Substitute Numbers:
16010-SD4-Z01, E98Z-9155-A, F54666, F65487, FF723, G2975, GF182, GF698, PF5487

Additional Fitment Information:
Vehicle Block CC Engine CID
1974 - BMW Bavaria L 2788 6 Cyl 2.8L 170

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1974 - BMW 3.0S

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1974 - BMW 3.0S

Meyle
Additional Fitment Information:
Vehicle
1974 - BMW 3.0CS

Hengst
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 6 : 8mm Carburetor Motors

Additional Fitment Information:
Vehicle
1974 - BMW 3.0S

Redline
  • 38 DGES
  • Outlaw - Electric Choke - Manifold and Performance upgrade
  • Outlaw - Electric Choke - DGAS REDLINE WEBER 38 Synchronous Performance Carburetor Conversion Kit. Replacement conversion for pre-1973 California exempted vehicles. Manifold & Performance upgrade, 1bl. Solex to 2 bl., Weber use K202-38. Warranty & Technical support are only handled through the manufacture, REDLINE WEBER @ 8007332277 ext.7457. DO NOT CONTACT THE SUPPLIER FOR WARRANTY OR RETURN, PERFORMANCE APPLICATION NOT SUBJECT TO RETURN.
  • Outlaw - Electric Choke
  • DGAS

Additional Fitment Information:
Vehicle
1974 - BMW 2002tii

Redline
  • 32/36 DGV CARB Legal
  • Manual Choke - DGAV 33B - California Legal
  • Manual Choke

Additional Fitment Information:
Vehicle
1974 - BMW 2002tii

VDO
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
1974 - BMW 3.0CS

Hengst
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
1974 - BMW 2002tii
Showing 1 - 10 of 32 products

Loading...