2024 Mishimoto Parts

Choose a Make for your 2024 vehicle

BMW GMC Jeep Lincoln

Showing 1 - 5 of 5 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2024 Lincoln Navigator Intercooler Kit 6 Cyl 3.5L Mishimoto

2015+ Ford F-150 EcoBoost Intercooler
Intercooler, fits Ford F-150 EcoBoost 2015+
Product Attributes:
- SellingPoint04: 163-percent Increase In External Fin Surface Area
- TechSpec Pipe Shape: N/a
- SellingPoint05: Cnc-machined Inlets And Outlets Are Ridged For Greater Holding Power
- SellingPoint06: All-aluminum, Tig-welded Construction
- SellingPoint07: Internal Fin Design For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint01: Direct Fit For The 2015+ Ford F-150 Ecoboost
- SellingPoint02: 10f (5.5c) Reduction In Intake Air Temp
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 29
- SellingPoint03: 77-percent Increase In Internal Core Volume
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Fits With Stock And Mishimoto 2.7l And 3.5l Intercooler Pipe Kits
- SellingPoint09: Fits With Stock Intercooler Fans Without Modification
- CARB EO Number: D-759-6
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 9.4
- TechSpec Maximum Recommended Boost Pressure (PSI): 50
- TechSpec Core Thickness (in): 4.72
- TechSpec Pipe Diameter: N/a
- OptionLabel: Sleek Silver
- SellingPoint10: Available In Sleek Silver Or Stealth Black
- TechSpec Note: N/a
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.7l V6 Ecoboost--3.5l V6 Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 19.6
- TechSpec Overall Height (in): 9.5
- TechSpec Applications: 2015+ Ford F-150 Ecoboost--2017+ Ford Raptor 3.5l V6 Ecoboost--2018+ Ford Expedition 3.5l V6 Ecoboost--2018+ Lincoln Navigator 3.5l V6 Ecoboost
- TechSpec Includes: (1) Mishimoto Intercooler W/ Assembled Rubber Trim--(1) Bypass Valve Bracket--mounting Hardware--bypass Valve Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 2.5
- TechSpec Overall Width (in): 7
- TechSpec Outlet (in): 3
Features:
- 77-percent increase in internal core volume
- 163-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Direct fit for the 2015+ Ford F-150 EcoBoost
- 10 F (5.5 C) reduction in intake air temp
Keep those air intake temps down! With Mishimoto's Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2024 - Lincoln Navigator	V	3496	6 Cyl 3.5L	L Livery	213

1 In Stock

$1,596.47 CAD

$1,915.76 CAD

Brand	Mishimoto
Part #	M1NMMINT-F150-15SL
Condition	New
Warehouse	B

UPC: 748354032574

2024 BMW M3 Skid Plate 6 Cyl 3.0L Mishimoto

Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Mishimoto Skid Plate, Fits BMW G8X M2/M3/M4 2021+
Product Attributes:
- SellingPoint04: Retains Air Dam For Optimized Pressure Differential And Airflow Through Oil Cooler Core
- SellingPoint05: Protective Crosscuts Allow Ample Airflow While Blocking Debris
- TechSpec Overall Height (Inches): 24
- SellingPoint06: Installs In Under An Hour With No Drilling Or Cutting Required
- SellingPoint07: Includes Everything Needed For Installation
- SellingPoint01: Direct Fit For 2021+ Bmw G8x M2/m3/m4
- SellingPoint02: Protects Engine And Oil Cooler From Damage
- SellingPoint03: Constructed From High-strength Aluminum And Powdercoated For A Durable, Corrosion-resistant Finish
- TechSpec Length (Inches): 35.8
- TechSpec Minimum Yield Strength: N/a
- TechSpec Chassis Codes: G80--g82--g83--g87
- SellingPoint08: Fits Both Stock And Mishimoto Oil Coolers
- SellingPoint09: Recessed Mounting Hardware Provides Smooth Surface To Avoid Snagging On Obstacles Or Shearing Mounting Bolts
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Fitment With Competition Sport (cs) Models May Require Enlarging Holes In The Front Splitter
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 5052-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Bmw M3 I6 3.0l Twin-turbo 2021+--bmw M3 Competition I6 3.0l Twin-turbo 2021+--bmw M3 Competition Sport I6 3.0l Twin-turbo 2023+--bmw M4 I6 3.0l Twin-turbo 2021+--bmw M4 Competition I6 3.0l Twin-turbo 2021+--bmw M2 I6 3.0l Twin-turbo 2023+
- TechSpec Includes: (1) Mishimoto Aluminum Skidplate--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
Features:
- Direct fit for 2021+ BMW G8X M2/M3/M4
- Protects engine and oil cooler from damage
- Constructed from high-strength aluminum and powder coated for a durable, corrosion-resistant finish
- Retains air dam for optimized pressure differential and airflow through oil cooler core
- Protective crosscuts allow ample airflow while blocking debris
- Installs in under an hour with no drilling or cutting required
- Includes everything needed for installation
- Fits both stock and Mishimoto oil coolers
- Recessed mounting hardware provides smooth surface to avoid snagging on obstacles or shearing mounting bolts
- Mishimoto Lifetime Warranty
The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road’s surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2024 - BMW M3	L	2993	6 Cyl 3.0L	CS	-

6 In Stock

$739.24 CAD

$887.09 CAD

Brand	Mishimoto
Part #	M1NMMSD-G80-21WBK
Condition	New
Warehouse	B

UPC: 840197712504

2024 GMC Sierra 1500 Engine Oil Catch Can Kit 8 Cyl 6.2L Mishimoto

Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
Product Attributes:
- SellingPoint04: Prevents Blow-by From Contaminating Intake Mixture And Causing Knock
- SellingPoint05: Internal Air Diverter, Baffle, And 50 Micron Bronze Filter Maximize Oil Separation
- SellingPoint06: Catch Can Captures Blow-by, Preventing It From Fouling The Engine Oil
- SellingPoint07: Direct-fit Bracket Mounts The Catch Can Away From Engine Vibration
- SellingPoint01: Direct Fit For 2019+ Chevrolet/gmc 1500 With 5.3l/6.2l V8
- SellingPoint02: Installs In Under An Hour
- SellingPoint03: Protects Intake Valves From Power-robbing Carbon Buildup
- TechSpec Chassis Codes: T1
- SellingPoint08: Sturdy 3mm-thick Steel Brackets Withstand Rough Roads And Off-road Abuse
- SellingPoint09: Pre-installed Quick-disconnect Fittings For Clean Installation
- TechSpec Drain Plug Thread Size: 3/8-npt
- TechSpec Outlet: M16x1.5
- TechSpec Catch Can Diameter (in): N/a
- SellingPoint10: Filter And Can Are Fully Serviceable
- TechSpec Note: After Installation, Mishimoto Recommends Checking The Contents Of The Baffled Catch Cans Every 1,000 Miles Until A Baseline Is Established. Oil Blow-by Accumulation Will Vary With Ambient Temperatures And Driving Conditions. It Is Important That The Conte
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 5.3l L83--6.2l L87
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: 2019+ Chevy Silverado 1500 5.3l/6.2l
- TechSpec Includes: (1) Direct-fit Mounting Bracket--(1) 3 Fl. Oz. Black, Anodized 6061-aluminum Catch Can--(2) Cnc-machined Aluminum Barbed Fittings--(2) Hoses W/ Pre-installed Quick-disconnect Fittings--(2) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Inlet: M16x1.5
Features:
- Direct fit for 2019+ Chevrolet/GMC 1500 with 5.3L/6.2L V8
- Installs in under an hour
- Protects intake valves from power-robbing carbon buildup
- Prevents blow-by from contaminating intake mixture and causing knock
- Internal air diverter, baffle, and 50 micron bronze filter maximize oil separation
- Catch can captures blow-by, preventing it from fouling the engine oil
- Direct-fit bracket mounts the catch can away from engine vibration
- Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
- Pre-installed quick-disconnect fittings for clean installation
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
The T1 Chevrolet Silverado is offered with both 5.3L and 6.2L LS engines. These engines feature direct injection, which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that's where this Mishimoto Chevrolet/GMC T1 direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Chevrolet/GMC T1 catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2024 - GMC Sierra 1500	V	6162	8 Cyl 6.2L	376

6 In Stock

$279.24 CAD

$335.09 CAD

Brand	Mishimoto
Part #	M1NMMBCC-T1-19
Condition	New
Warehouse	B

UPC: 840197718155

2024 BMW M4 Intercooler Kit 6 Cyl 3.0L Mishimoto

Performance Charge Air Cooler Manifold, Fits BMW G8X M3/M4 2021+
Performance Charge Air Cooler Manifold, Fits BMW G8X M3/M4 2021+
Product Attributes:
- SellingPoint04: Nitrous Ready With Easily Accessible 1/8-npt Or 1/16-npt Nozzle Adapters And Caps
- TechSpec Pipe Shape: N/a
- SellingPoint05: Includes Ptfe -an Fuel Lines That Tee Into Stock Fuel Lines
- SellingPoint06: Robust Bar-and-plate Core For Iats As Low As 11-degrees Above Ambient
- SellingPoint07: Improves Flow To Each Cylinder By An Average Of 14-percent
- SellingPoint01: Direct Fit For 2021+ G8x Bmw M3/m4
- SellingPoint02: Bar-and-plate Core Tig Welded To Cast-aluminum Manifold Withstands Over 60 Psi Of Boost
- TechSpec Maximum Recommended Horsepower: 1150
- TechSpec Overall Length (in): 11.5
- SellingPoint03: Includes Billet Fuel Rail, Lines, And Precision-drilled Ports For Port Injection
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: G80--g82--g83--f97--f98
- TechSpec Pipe Length: N/a
- SellingPoint08: Improves Cooling Without Increasing Pressure Drop Over Stock
- SellingPoint09: 33-percent Core Volume Increase Over Stock With A 24-percent Greater Flow Area
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 6.3
- TechSpec Maximum Recommended Boost Pressure (PSI): 60
- TechSpec Core Thickness (in): 4.9
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Cfd-designed Lower Plenum For Even Flow Distribution And Safe Fueling
- TechSpec Note: Use Of The Included Fuel Rail Is Optional And For Race-use Only. The Fuel Rail Has A Tamper-proof Sticker And May Be Removed Only If The Vehicle Will No Longer Be Used On The Street Or Highway. Check Local Emissions Regulations Before Removing.
- TechSpec Installation Notes: N/a
- SellingPoint15: Also Fits X3 M/x4 M Models With Included Evap Plug And Fitting
- SellingPoint16: Mishimoto Lifetime Warranty
- Install Difficulty: 4
- SellingPoint11: Cast And Cnc-machined Runners Accept Stock O-rings Or Included Fiber Gasket
- SellingPoint12: Includes Harness Brackets, Engine Cover Mount, And Custom Evap Lines For Seamless Install
- TechSpec Engine Codes: S58b30
- SellingPoint13: Plenum Cutout Allows Easy Access To Oil Filter Without Impeding Flow
- SellingPoint14: Includes Two Additional 1/8-npt Ports For Manifold Reference Lines Or Sensors
- TechSpec Core Length (in): 9.8
- TechSpec Overall Height (in): 13.1
- TechSpec Applications: 2021+ Bmw M3 I6 3.0l--2021+ Bmw M4 I6 3.0l--2021+ Bmw M3 Competition I6 3.0l--2021+ Bmw M4 Competition I6 3.0l--2019+ Bmw X3 M I6 3.0l--2019+ Bmw X4 M I6 3.0l--2019+ Bmw X3 M Competition I6 3.0l--2019+ Bmw X4 M Competition I6 3.0l
- TechSpec Includes: (1) Mishimoto Charge Air Cooler Manifold--(1) Intake Manifold Gasket--(1) Manifold/intercooler Accessory Bracket Set--(6) -6 Orb Plugs--(6) -6 Orb To 1/8-in Npt Adapters--(6) -6 Orb To 1/16-in Npt Adapters--(1) Fuel Rail--(6) Fuel Injector Blanks--(2) -8
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): N/a
- TechSpec Overall Width (in): 21
- TechSpec Outlet (in): N/a
----Insane power levels require equally insane amounts of fuel, so we've added provisions for port fuel injection, including a billet fuel rail and anodized aluminum injector blanks to cap the injector ports when not in use. Our precision-machined injector ports feature optimized geometry for the perfect mixing of air and fuel, with no drilling required. The included PTFE -AN fuel lines and fittings are suitable for ethanol and tee into the stock fuel lines. Additionally, six nitrous ports accept 1/8 or 1/16-NPT nozzles and can be capped off when not in use.----If cooling, flow, and reliability weren't enough, we also designed our charge air cooler to fit like stock. This kit includes brackets to keep your wiring tidy, a mount to fit the stock engine cover, and custom EVAP lines for a seamless installation. A convenient cutout in the plenum allows for easy access to the oil filter, without affecting flow. Like all Mishimoto products, this performance charge air cooler for the 2021+ BMW G80 M3 is backed by our Mishimoto Lifetime Warranty for a lifetime of exceptional performance. So if you want the ultimate upgrade to squeeze serious power from your S58 engine, this Mishimoto charge air cooler manifold is for you.

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Engine	Sub Model	CID
2024 - BMW M4	L	2993	S58B30T0	6 Cyl 3.0L	Competition	-

1 In Stock

$5,631.03 CAD

$6,757.24 CAD

Brand	Mishimoto
Part #	M1NMMINT-G80-21BK
Condition	New
Warehouse	B

UPC: 840197718087

2024 Jeep Grand Cherokee Engine Oil Filter Housing 6 Cyl 3.6L Mishimoto

Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
Product Attributes:
- SellingPoint04: Helps Prevent Hard-to-diagnose And Potentially Costly Oil Leaks
- SellingPoint05: Includes New, Pre-installed Oil Pressure And Temperature Sensors
- SellingPoint06: Upgraded Viton Seals Resist Fuel And Oil For Extended Service Life
- TechSpec Overall Length (in): 15
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Fits 3.6l/3.2l Pentastar Engines Found In Many Jeep, Chrysler, And Dodge/ram Vehicles
- SellingPoint02: All-aluminum Housing Won't Crack Or Split Like Stock Plastic
- SellingPoint03: Includes New Oil Filter, Filter Cap, Intake Manifold Gaskets, Oil Seals, And Bolts For A One-stop Solution
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 2.32
- TechSpec Core Thickness (in): 2.02
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: Replaces Oe Part Numbers: 5184294ac, 5184294ad, 5184294ae, 5184304ae, 5184304af, 68105583aa, 68105583ab, 68105583ac, 68105583ad, 68105583ae, 68105583af, 68105583ag, 68308741aa, 68308741ab, 68308741ac, 68308741af, 68310865aa, 68310865ab, 68310865ac, 683108
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Pentastar
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 5.3
- TechSpec Overall Height (in): 9
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: To Avoid Damage, This Vehicle Must Use A Filter For 2014+ Vehicles. Oem Part Number 68191349ac Or Equivalent.
- TechSpec Applications: 2011-2017 Chrysler 200 3.6l V6--2011-2017 Chrysler 300 3.6l V6--2014-2016 Chrysler Town & Country 3.6l V6--2011-2014 Dodge Avenger 3.6l V6--2011-2017 Dodge Challenger 3.6l V6--2011-2017 Dodge Charger 3.6l V6--2011-2015 Dodge Durango 3.6l V6--2011-2017 Dod
- TechSpec Includes: (1) Oil Filter Housing--(1) Heat Exchanger--(1) Oil Filter Cap--(1) Oil Filter--(1) Oil Temperature Sensor--(1) Oil Pressure Sensor--(6) Gaskets--(1) Hardware Pack--mishimoto Lifetime Warranty
- TechSpec Rows: 8
- TechSpec Inlet: N/a
- TechSpec Core Construction: Stacked Plate
- TechSpec Overall Width (in): 4
but they're not without their flaws.----The stock 3.6 oil filter housing is made from plastic and is known to become brittle after repeated heat cycles. When that happens, even the slightest amount of torque on the filter cap while performing an oil change can be enough to crack the housing and cause significant oil leaks. To make matters worse, the oil filter housing lives underneath the intake manifold, making it difficult to identify and diagnose the leak. Oil running down the back of the engine can look like a failed rear-main seal and end up costing you thousands in parts and labor, only to have the problem continue. Luckily, Mishimoto offers a solution to prevent the headache of chasing down oil leaks and give you peace of mind.----Our all-aluminum 3.6/3.2L Pentastar oil filter housing kit is a complete safeguard against frustrating oil leaks. As the name suggests, our oil filter housing swaps the stock brittle plastic for a robust aluminum replacement. This housing is significantly stronger than the stock polymer version and won't become brittle over time. We've also upgraded the seals to Viton for improved oil and fuel resistance, ensuring a long service life. This complete kit includes the aluminum housing, oil filter, filter cap, intake manifold gaskets, filter housing seals, heat exchanger, oil temp and pressure sensors, and bolts, making it a one-stop solution for your Pentastar. Like all Mishimoto products, this 3.6L/3.2L Pentastar aluminum oil filter housing kit is backed by our Mishimoto Lifetime Warranty, for a lifetime of leak-free reliability.

This Part Fits the Following OEM/Substitute Numbers:

5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AE, 68105583AF, 68105583AG, 68308741AA, 68308741AB, 68308741AC, 68308741AF, 68310865AA, 68310865AB...VIEW MORE

Additional Fitment Information: