2003 Mitsubishi K&N Parts

Choose a Model for your 2003 Mitsubishi


Showing 1 - 10 of 23 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
2003 - Mitsubishi Outlander L 2351 4 Cyl 2.4L -

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Galant V 2972 6 Cyl 3.0L LS 181

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Eclipse L 2351 4 Cyl 2.4L GS -

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2003 - Mitsubishi Outlander L 2351 4 Cyl 2.4L -

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Galant L 2351 4 Cyl 2.4L DE -

K&N
  • Performance Air Intake System
  • Includes Red Air Filter/Silver Tubing; Estimated Horsepower Gain 5.88 HP At 4213 RPM;CARB E.O. D-269-42
  • K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a silver powder coat finish.
  • Typhoon Short Ram Cold Air Induction Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 6.500 In. (165mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 5.88 Hp @ 4213 Rpm
    • TUV Approved (Europe): No
    • Intake Pipe Inlet Shape: Round
    • Replacement Filter: Ru-4730
    • Item Weight: 6.500 Lbs. (3 Kg)
    • RPM: 4213
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Air Filter Outlet Length: 3.000 In. (76mm)
    • System Type: Short Ram
    • Clamp Quantity: 5
    • Air Filter Large End Diameter: 6.000 In. (152mm)
    • Intake Pipe Outlet Shape: Round
    • Intake Pipe Color: Silver
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Air Filter Outlet Width: 3.000 In. (76mm)
    • Horse Power Increase: 6 Hp
    • Intake Pipe Inlet Length: 12.000 In. (305mm)
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Intake Pipe Inlet Width: 3.000 In. (76mm)
    • Intake Pipe Outlet Length: 12.000 In. (305mm)
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Intake Pipe Outlet Width: 3.000 In. (76mm)
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tube
    • Easy To Install Usually In 90 Minutes or Less
    • Lasts Up To 100000 Miles Before Service Is Required
    • Replaces Entire Factory Air Intake System
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • The K&N 69-6506TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6506TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Eclipse L 2351 4 Cyl 2.4L RS -

K&N
  • Replacement Air Filter
  • Panel; H-1.188 in.; L-9.813 in.; W-8.813 in.
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Width: 8.813 In.
    • Item Weight: 1.500 Lbs. (0.7 Kg)
    • Machine Washable: Yes
    • Product Box Height: 11.560 In. (294mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: Oem
    • Product Box Width: 1.750 In. (44 Mm)
    • Product Box Length: 10.440 In. (265mm)
    • Outside Diameter: Oem
    • Item Height: 1.188 In. (30mm)
    • Prop 65 (C, R or CR): Cr
    • Package Content: 1
    • Top Style: Open
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Inner Wire: No
    • Outside Width: 8.813 In. (224mm)
    • Package Contents: 1 Air Filter
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • Overall Length: N/a
    • Package Quantity: 1
    • Shape: Panel
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.35 Oz (40 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Outside Length: 9.813 In. (249mm)
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
46308, 6308, 88308, A1319, A1413C, A35050, AF383, AF5050, AF7876, C25020, CA7605, MD620837, MR571473, PA5050, RAF82, SA7605, TA35050, VA128...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Montero Sport V 3497 6 Cyl 3.5L XLS 215

K&N
  • Replacement Air Filter
  • Panel; H-2 in.; L-8.313 in.; W-8.063 in.
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Width: 8.063 In.
    • Item Weight: 2.500 Lbs. (1.2 Kg)
    • Machine Washable: Yes
    • Product Box Height: 8.630 In. (219mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: Oem
    • Product Box Width: 3.630 In. (92 Mm)
    • Product Box Length: 8.500 In. (216mm)
    • Outside Diameter: Oem
    • Item Height: 2.000 In. (51mm)
    • Prop 65 (C, R or CR): Cr
    • Package Content: 1
    • Top Style: Open
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Inner Wire: No
    • Outside Width: 8.063 In. (205mm)
    • Package Contents: 1 Air Filter
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • Overall Length: N/a
    • Package Quantity: 1
    • Shape: Panel
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.2 Oz (35 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Outside Length: 8.313 In. (211mm)
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
1500A023, 19301, 46215, 6215, 88215, A1311, A2044C, A35244, AF5244, AF7914, BA5244, C21361, CA8208, FB19301, HPR8208, MA5244, MGA46215, MR552951...VIEW MORE

Additional Fitment Information:
Vehicle
2003 - Mitsubishi Outlander

K&N
  • Performance Air Intake System
  • Includes Red Air Filter/Red Tubing; Estimated Horsepower Gain 5.88 HP At 4213 RPM;CARB E.O. D-269-42
  • K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.
  • Typhoon Short Ram Cold Air Induction Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 6.500 In. (165mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 5.88 Hp @ 4213 Rpm
    • TUV Approved (Europe): No
    • Intake Pipe Inlet Shape: Round
    • Replacement Filter: Ru-4730
    • Item Weight: 6.500 Lbs. (3 Kg)
    • RPM: 4213
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Air Filter Outlet Length: 3.000 In. (76mm)
    • System Type: Short Ram
    • Clamp Quantity: 5
    • Air Filter Large End Diameter: 6.000 In. (152mm)
    • Intake Pipe Outlet Shape: Round
    • Intake Pipe Color: Red
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Air Filter Outlet Width: 3.000 In. (76mm)
    • Horse Power Increase: 6 Hp
    • Intake Pipe Inlet Length: 12.000 In. (305mm)
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Intake Pipe Inlet Width: 3.000 In. (76mm)
    • Intake Pipe Outlet Length: 12.000 In. (305mm)
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: Yes
    • Intake Pipe Outlet Width: 3.000 In. (76mm)
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tube
    • Easy To Install Usually In 90 Minutes or Less
    • Lasts Up To 100000 Miles Before Service Is Required
    • Replaces Entire Factory Air Intake System
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • The K&N 69-6506TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6506TR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Eclipse L 2351 4 Cyl 2.4L RS -

K&N
  • Performance Air Intake System
  • Includes Red Air Filter/Blue Tubing; Estimated Horsepower Gain 4.26 HP At 4491 RPM;CARB E.O. D-269-32
  • K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish.
  • Typhoon Short Ram Cold Air Induction Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 6.500 In. (165mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 4.26 Hp @ 4491 Rpm
    • TUV Approved (Europe): No
    • Intake Pipe Inlet Shape: Round
    • Replacement Filter: Ru-4730
    • Item Weight: 6.400 Lbs. (2.9 Kg)
    • RPM: 4491
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Air Filter Outlet Length: 3.000 In. (76mm)
    • System Type: Short Ram
    • Clamp Quantity: 5
    • Air Filter Large End Diameter: 6.000 In. (152mm)
    • Intake Pipe Outlet Shape: Round
    • Intake Pipe Color: Blue
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Air Filter Outlet Width: 3.000 In. (76mm)
    • Horse Power Increase: 4 Hp
    • Intake Pipe Inlet Length: 16.000 In. (406mm)
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Intake Pipe Inlet Width: 3.000 In. (76mm)
    • Intake Pipe Outlet Length: 16.000 In. (406mm)
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: Yes
    • Intake Pipe Outlet Width: 3.000 In. (76mm)
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tube
    • Easy To Install Usually In 90 Minutes or Less
    • Lasts Up To 100000 Miles Before Service Is Required
    • Replaces Entire Factory Air Intake System
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • The K&N 69-6540TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6540TB air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2003 - Mitsubishi Lancer L 2000 4 Cyl 2.0L OZ Rally -
Showing 1 - 10 of 23 products

Loading...