1983 Pontiac Firebird Transmission Parts


Showing 1 - 10 of 55 products
Image
SKU
Product
Rating
Price

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Trans Type Transmission Position Trans. Speed
1983 - Pontiac Firebird Transmission Manual Front 5

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Warner
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Trans Type Transmission Trans. Speed
1983 - Pontiac Firebird Transmission Manual 4

FelPro
  • Automatic Transmission Gasket
  • FEL-PRO TOS 18663 Automatic Transmission Gasket
  • Product Attributes:
    • Configuration: One Piece
    • Length: 13.125
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
30157, 7432669, 749014-PO, 76-3043, 8642360, 8654799, GB12866, W39365, W39365TC

Additional Fitment Information:
Vehicle Transmission Trans. Speed Transmission Manuf. Code
1983 - Pontiac Firebird Automatic 4 THM700-R4/4L60/MD8

Lokar
  • U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
  • Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
  • Hi-Tech Kickdown Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Trans Model: Gm- Th700 R4 (auto) 4 Speed
  • Features:
    • U-Cut-To-Fit Design Works In Any Application
    • Specially Extruded Liner For Extended Cable Life
    • Aluminum Ferrule To Eliminate Fraying
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.

Additional Fitment Information:
Vehicle Block CC Engine Transmission Manuf. Code CID
1983 - Pontiac Firebird V - 8 Cyl 5.0L THM700-R4/4L60/MD8 305

Centerforce
  • Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
  • Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
  • Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Throwout Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Throwout Bearing
  • Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle
1983 - Pontiac Firebird

Ram
  • pilot bushing/bearing
  • 0.591 in. ID; 1.383 in. OD; 0.357 in. Length
  • Pilot bushing/bearing Pontiac/Oldsmobile
  • Product Attributes:
    • Inside Diameter: 0.591 In.
    • Outside Diameter: 1.383 In.
    • Overall Length: 0.357 In.
  • Features:
    • Pilot Bushing/Bearing
    • Strictly Factory Warranty Only
  • Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Pontiac Firebird V - 8 Cyl 5.0L 305

Ram
  • steel flywheel
  • 2.75 Register; 166 Teeth; 0 Balance
  • Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Pontiac Firebird V - 8 Cyl 5.0L 305

Mcleod
  • Super Street Pro:Kit:1971-92 GM 10.5" x 1-1/8x26
  • Super Street Pro:Kit:1971-92 GM 10.5" x 1-1/8x26
  • Product Attributes:
    • Pilot Bushing Material: Bronze Oilite
    • Pressure Plate Style: Diaphragm
    • Application: 1971-92 Gm
    • Alignment Tool Included: Yes
    • Disc Material: Organic/ceramic
    • Pilot Bushing Included: Yes
    • Horsepower Rating: 500
    • Make: Gm
    • Number of Discs: Single
    • Disc Diameter: 10.5in.
    • Spline: 1-1/8 X 26
    • Throwout Bearing Included: Yes
    • Flywheel Included: No
  • Features:
    • McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
  • The Super Street Pro clutch kit is ideal for both the street and the track. We recommend it for cars up to 550 Hp (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual faced organic and metallic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a street friendly yet track proven clutch, the McLeod Super Street Pro is your best choice.

Additional Fitment Information:
Vehicle Block CC Transmission Region Engine Sub Model CID
1983 - Pontiac Firebird V - Manual United States 8 Cyl 5.0L Trans Am 305

Mcleod
  • Bolt Pak 3/8" Pressure Plate Small Hex Head (6 Per Box)
  • Bolt Pak 3/8-16 Pressure Plate Bolt:Small Hex Head:(6 Bolts Per Box)
  • Product Attributes:
    • Thread Size: 3/8-16
    • Nuts Included: No
    • Fastener Style: Bolt
    • Quantity: Pack Of 6
    • Fastener Head Style: Hex
    • Washers Included: No
    • Wrench Diameter: 1/2in.
    • Fastener Material: Steel
    • Fastener Finish: Black Oxide
    • Underhead Length: .910in.
  • McLeod pressure plate bolts fasten your pressure plate to your flywheel for durable bolt-on performance. The bolts come in various thread sizes and styles to ensure a correct fit for your specific vehicle application. They are manufactured from premium-grade steel and sport a black oxide finish to resist corrosion. When it comes to bolt-on performance, make McLeod your parts connection and get the most out of your ride.

Additional Fitment Information:
Vehicle Block CC Transmission Region Engine Sub Model CID
1983 - Pontiac Firebird V - Manual United States 8 Cyl 5.0L Trans Am 305

Centerforce
  • Centerforce(R) Accessories; Clutch Pilot Bearing
  • 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
  • Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
  • Pilot Bearing
  • Product Attributes:
    • Inside Diameter: 0.612 In.
    • WARNING CA Proposition 65: Yes
    • Outside Diameter: 1.094 In.
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Overall Length: 0.720 In.
  • Features:
    • Pilot Bearing
  • Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Pontiac Firebird V - 8 Cyl 5.0L Trans Am 305
Showing 1 - 10 of 55 products

Loading...