2021 Toyota Highlander Suspension Parts

Choose your Part Name for your 2021 Toyota Highlander

Air Suspension Helper Spring Alignment Camber Adjusting Eccentric Bolt Alignment Camber Kit Lateral Arm Nut Suspension Ball Joint Suspension Control Arm Suspension Control Arm Bumper Suspension Ride Height Sensor Suspension Shock Absorber Suspension Stabilizer Bar Link Suspension Stabilizer Bar Link Kit Suspension Trailing Arm

Showing 1 - 10 of 20 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2021 Toyota Highlander Suspension Control Arm Bumper - Front Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Front - Lower

Additional Fitment Information:

Vehicle	Position
2021 - Toyota Highlander	Front

Brand	Genuine
Part #	OES1744644
Condition	New
Warehouse	A

2021 Toyota Highlander Lateral Arm Nut Genuine

2021 Toyota Highlander Lateral Arm Nut Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle
2021 - Toyota Highlander

Brand	Genuine
Part #	OES3699205
Condition	New
Warehouse	A

2021 Toyota Highlander Suspension Ride Height Sensor - Front Left Aisin

2021 Toyota Highlander Suspension Ride Height Sensor - Front Left Aisin

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Position
2021 - Toyota Highlander	Front Left

Brand	Aisin
Part #	ASC2110277
Condition	New
Warehouse	A

2021 Toyota Highlander Alignment Camber Kit - Front Moog

Camber Adjusting Kit
From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 17 (mm) Bolts
MOOG K90477 Camber Adjusting Kit
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

13325A, 264-3645, 41217, 45K18039, 616-1039, 6161028, 756501, AA3645, MS86017, VV13325A

Additional Fitment Information:

Vehicle	Position
2021 - Toyota Highlander	Front

Brand	Moog
Part #	M12K90477
Condition	New
Warehouse	B

UPC: 080066323992

2021 Toyota Highlander Air Suspension Helper Spring SuperSprings

Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in. Do Not Use On Hybrid Models
Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.;
Coil SumoSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.

Additional Fitment Information:

Vehicle	Drive Type
2021 - Toyota Highlander	AWD

Brand	SuperSprings
Part #	CSS-1145
Condition	New
Warehouse	C

2021 Toyota Highlander Air Suspension Helper Spring - Rear SuperSprings

Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.
Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.;
Coil SumoSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
2021 - Toyota Highlander	Rear	XSE	FWD

Brand	SuperSprings
Part #	CSS-1125
Condition	New
Warehouse	C

2021 Toyota Highlander Air Suspension Helper Spring - Front SuperSprings

Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in. Do Not Use On Hybrid Models
Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.45 in.;
Coil SumoSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
2021 - Toyota Highlander	Front	XSE	AWD

Brand	SuperSprings
Part #	CSS-1145
Condition	New
Warehouse	C

2021 Toyota Highlander Air Suspension Helper Spring SuperSprings

Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.
Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.;
Coil SumoSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.

Additional Fitment Information:

Vehicle	Drive Type
2021 - Toyota Highlander	FWD

Brand	SuperSprings
Part #	CSS-1125
Condition	New
Warehouse	C

2021 Toyota Highlander Suspension Shock Absorber - Rear Rough Country

Rear; 1.5-2.5 in. Lift; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 20.59 in.; Collapsed Length 13.58 in.; w/1.5 - 2.5 in. Lift
N3 Shocks; Rear; 1.5-2.5 in. Lift; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 20.59 in.; Collapsed Length 13.58 in.;
N3 Shocks
Product Attributes:
- Collapsed Length: 13.580 In.
- WARNING CA Proposition 65: No
- Extended Length: 20.590 In.
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- 35mm Piston
- Chromed Hardened 18mm Piston Rod
- 54mm Shock Body To Dissipate Heat Faster
- 36kN Tensile Strength
- Spring Loaded Piston Rod Seal
- Military Spec. Fluid Rated To minus 40 Degrees Celsius
- Rubber Bushings For Better Absorption
- Metallic Silver Paint
- Free Shipping
- 3-Year Manufacturers Warranty
Improve your on and off-road ride quality with Rough Countrys premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.

Additional Fitment Information:

Vehicle	Position
2021 - Toyota Highlander	Rear

Brand	Rough Country
Part #	23317_A
Condition	New
Warehouse	C

2021 Toyota Highlander Suspension Shock Absorber - Rear Rough Country

1.5-2.5 in. Lift; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 20.59 in.; Collapsed Length 13.58 in.;Rear w/1.5 - 2.5 in. Lift
N3 Shocks; Rear; 1.5-2.5 in. Lift; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 20.59 in.; Collapsed Length 13.58 in.;
N3 Shocks
Product Attributes:
- Collapsed Length: 13.580 In.
- WARNING CA Proposition 65: No
- Extended Length: 20.590 In.
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- 35mm Piston
- Chromed Hardened 18mm Piston Rod
- 54mm Shock Body To Dissipate Heat Faster
- 36kN Tensile Strength
- Spring Loaded Piston Rod Seal
- Military Spec. Fluid Rated To minus 40 Degrees Celsius
- Rubber Bushings For Better Absorption
- Metallic Silver Paint
- Free Shipping
- 3-Year Manufacturers Warranty
Improve your on and off-road ride quality with Rough Countrys premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.