2003 Dodge Neon K&N Parts

Choose your Submodel for your 2003 Dodge Neon

R/T SE SRT-4 SXT

Showing 1 - 10 of 16 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Dodge Neon Engine Oil Filter 4 Cyl 2.0L K&N

Oil Filter
H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	1996	4 Cyl 2.0L	SXT	122

93 In Stock

$23.90 CAD

$28.68 CAD

Brand	K&N
Part #	K33HP-1002
Condition	New
Warehouse	B

2003 Dodge Neon Engine Oil Filter 4 Cyl 2.4L K&N

Oil Filter
H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	2429	4 Cyl 2.4L	SRT-4	148

9 In Stock

$23.90 CAD

$28.68 CAD

Brand	K&N
Part #	K33HP-2009
Condition	New
Warehouse	B

2003 Dodge Neon Engine Oil Filter 4 Cyl 2.4L K&N

Oil Filter
H-5.063 in.; OD-3 in.; 3/4 In. - 16; psi Relief Valve 11-14 Pro-Series Oil Filter w/o Wrench Off Nut
K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
High Flow Oil Filter
Product Attributes:
- Thread Size: .750 In. - 16
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.000 In. (127mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.300 In. (84 Mm)
- Package Material: Paperboard
- Product Box Length: 3.300 In. (84mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: No
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.

This Part Fits the Following OEM/Substitute Numbers:

1220323, 1220800, 122B323, 51516, 51762, FL400A, FL400S, HP10, HP2009, L20089, L20195, L35098, M1209, PFL400A, PH3600, PH5803, SS2009, YF0914302A...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	2429	4 Cyl 2.4L	SRT-4	148

9 In Stock

$12.96 CAD

$15.55 CAD

Brand	K&N
Part #	K33PS-2009
Condition	New
Warehouse	B

2003 Dodge Neon Air Intake Kit 4 Cyl 2.0L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 5.3 HP At 4641 RPM;CARB E.O. D-269-38
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a chrome-like finish.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-2520TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Neon, ACR, and RT as well as Chrysler Neon and Neon II models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2520TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing cooler air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	1996	4 Cyl 2.0L	SXT	122

Brand	K&N
Part #	69-2520TP
Condition	New
Warehouse	C

2003 Dodge Neon Air Intake Kit 4 Cyl 2.4L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 12.17 HP At 5312 RPM;CARB E.O. D-269-38
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a blue powder coat finish.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-2521TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge NeonSRT-4 models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2521TB cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the turbocharger inlet for a guaranteed power gain. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	2429	4 Cyl 2.4L	SRT-4	148

Brand	K&N
Part #	69-2521TB
Condition	New
Warehouse	C

2003 Dodge Neon Air Intake Kit 4 Cyl 2.4L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Polished Intake; Estimated Horse Power Gain 12.17 HP At 5312 RPM;CARB E.O. D-269-38
K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-2521TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Neon SRT-4 models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2521TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the turbo inlet for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	2429	4 Cyl 2.4L	SRT-4	148

Brand	K&N
Part #	69-2521TP
Condition	New
Warehouse	C

2003 Dodge Neon Air Intake Kit 4 Cyl 2.0L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Polished Intake; Estimated Horse Power Gain 5.3 HP At 4641 RPM;CARB E.O. D-269-38
K/N s easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-2520TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet and Dodge Neon models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2520TR cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	1996	4 Cyl 2.0L	SXT	122

Brand	K&N
Part #	69-2520TR
Condition	New
Warehouse	C

2003 Dodge Neon Air Filter K&N

Replacement Air Filter
Round; H-5.875 in.; OD 5 3/8 in.; ID 2.5 in.
K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 0.750 In. (19mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 5.375 In. (137mm)
- Width: 5.375 In.
- Item Weight: 1.500 Lbs. (0.7 Kg)
- Machine Washable: Yes
- Product Box Height: 7.250 In. (184mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 6.500 In. (165mm)
- Product Box Length: 6.500 In. (165mm)
- Outside Diameter: 5.375 In.
- Air Filter Large End Diameter: 5.500 In. (140mm)
- Item Height: 5.875 In. (149mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Package Content: 1
- Top Style: Rubber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Package Contents: 1 Air Filter
- Top Material: None
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Package Quantity: 1
- Shape: Round Tapered
- Top Outside Diameter: 5.500 In. (140mm)
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.33 Oz (39 Ml)
- Flange Inside Diameter: 2.500 In. (64mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Flange Type: Centered
- Package Type: Box
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:

42384, 4891097AA, 87384, A1827, A2048C, A25306, AF1072, AF5306, AF7946, BA5306, CA8805, DA7946, HPR8805, MA5306, MGA42384, PA4118, PA5306, SA8805...VIEW MORE

Additional Fitment Information:

Vehicle
2003 - Dodge Neon

Brand	K&N
Part #	E-1006
Condition	New
Warehouse	C

2003 Dodge Neon Air Intake Kit 4 Cyl 2.4L K&N

Performance Air Intake System
Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 9.76 HP At 5500 RPM;CARB E.O. D-269-31
K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Filtercharger Injection Performance Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 9.76 Hp @ 5500 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Rp-4660
- Item Weight: 11.100 Lbs. (5 Kg)
- RPM: 5500
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 4.000 In. (102mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 5.375 In. (137mm)
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 4.000 In. (102mm)
- Horse Power Increase: 10 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Dodge Neon	L	2429	4 Cyl 2.4L	SRT-4	148

Brand	K&N
Part #	57-1535
Condition	New
Warehouse	C

2003 Dodge Neon Air Filter 4 Cyl 2.4L K&N

Universal Air Filter-Carbon Fiber Top
Round Tapered; OD-4 in./5 3/8 in.; Flange L-5/8 in.; Inside Flange 4 in.; Centered; Filter Length 5 1/2 in.
K/N Composite Top Universal Air Filters-With advanced composite technology; carbon fiber provides the ultimate in strength with minimal weight. Carbon fiber provides 1/3 less weight than a conventional filter top.
Universal Carbon Fiber Top Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 0.625 In. (16mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 5.375 In. (137mm)
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Machine Washable: Yes
- Product Box Height: 7.250 In. (184mm)
- Filter Material: Cotton Gauze
- Product Box Width: 6.500 In. (165mm)
- Product Box Length: 6.500 In. (165mm)
- Air Filter Large End Diameter: 5.375 In. (137mm)
- Item Height: 5.500 In. (140mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Package Content: 1
- Top Style: Carbon Fiber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Package Contents: 1 Air Filter
- Top Material: None
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Package Quantity: 1
- Shape: Round Tapered
- Top Outside Diameter: 4.000 In. (102mm)
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 0.98 Oz (29 Ml)
- Flange Inside Diameter: 4.000 In. (102mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Filter Style: Pre-oiled
- Flange Type: Centered
- Package Type: Box
Features:
- Designed To Increase Horsepower And Acceleration
- Strong and Long Lasting Clamp On Design
- Carbon Fiber Composite Increases Aesthetics
- Lighter Than Conventional Filter Tops
- Washable And Reusable
- Pliable Flanges Absorb Vibration
- Flanges Can Be Stretched Up to 1/16 in. For In-Between Sizes
- One Year Limited Warranty
The RP-4660 Universal Air Filter is constructed from an oiled cotton filter media. It comes with a K&N embossed carbon fiber top for strength and durability. The carbon fiber element adds to the light-weight design and gives this filter a smooth glass like finish. The RP-4660 is a clamp-on filter that has an inside flange diameter of 4 inches and a flange length of 5/8 inches. The base is 5 3/8 inches and the filter height is 5 1/2 inches.