Shop By Product Matching "motor oil"

Choose a Make for your 1964 vehicle


Showing 1 - 10 of 19 products
Image
SKU
Product
Rating
Price

Fram
  • FRAM, PH11, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.420
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 200.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 13/16-16
    • Marine Approved: No
    • Outside Diameter: 3.813
    • Gasket Outside Diameter: 2.790
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

Additional Fitment Information:
Vehicle
1964 - American Motors Ambassador

Fram
  • FRAM, PH11, Oil Filter
  • Spin-on Oil Filter If space is not restricted
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.420
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 200.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 13/16-16
    • Marine Approved: No
    • Outside Diameter: 3.813
    • Gasket Outside Diameter: 2.790
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
57026, 662, 7026, A17, AL3950, AOF-160, HF929, LF136, PF1127

Additional Fitment Information:
Vehicle Block CC Engine CID
1964 - American Motors Classic V 4703 8 Cyl 4.7L 287

Fram
  • FRAM, PH11, Oil Filter
  • If space is not restricted Aluminum block Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.420
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 200.000
    • Gasket Material: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 13/16-16
    • Marine Approved: No
    • Outside Diameter: 3.813
    • Gasket Outside Diameter: 2.790
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

Additional Fitment Information:
Vehicle Block CC Engine CID
1964 - American Motors Classic L 3206 6 Cyl 3.2L 196

K&N
  • Oil Filter
  • H-4.688 in.; OD-3.781 in.; 13/16 in.-16 UNS Thread; w/o psi Relief Valve Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: 0.8125 In. - 16 Uns
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: No
    • Style: Canister
    • Item Weight: 0.900 Lbs. (0.4 Kg)
    • Product Box Height: 4.880 In. (124mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.810 In. (97 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.810 In. (97mm)
    • PSI Relief Valve: No
    • Outside Diameter: 3.781 In. (96mm)
    • Removal Nut: Yes
    • Item Height: 4.688 In. (119mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
147037, 168108130, 234774, 2347746, 317757, 384843C2, 51049, 51258, 70239930, A64453, FL2, FL9, HP2, HP5, L20033, L30005, M1203, PF24...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1964 - American Motors Classic L 3206 6 Cyl 3.2L 196

Derale
  • 8 Pass 17in. Series 7000 Copper/Aluminum Transmission Cooler Kit; Full Size
  • Tube And Fin Cooler Style; 16-5/8 in. Width; 10-1/4 in. Height; 3/4 in. Depth; 11/32 in. Hose Size; 4 ft. Hose Length
  • Transmission Cooler; Full Size (Carton)
  • Series 7000 Transmission Cooler Kit
  • Product Attributes:
    • Gross Vehicle Weight: 20500 Lbs.
  • Features:
    • Prevents Heat Related Transmission Failures
    • Extends Life Of Transmission
    • Improves Transmission Performance
    • Extruded Plastic Cooling Fin Guards
    • 8 Pass Cooler Design
    • 1/2 in. Copper Tubing Expanded Into Aluminum Cooling Fins
    • 11/32 in. Hose Barb Inlets
    • Rated At 20500 GVW
    • Includes Complete Hardware Kit
  • This Tube & Fin transmission cooler features 1/2 in. copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for full-size cars and medium size trucks and SUVs' that are used for part time towing, they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.

Additional Fitment Information:
Vehicle Sub Model
1964 - American Motors Classic Base

Wix
  • WIX Spin-On Lube Filter
  • Aluminum Engine; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.660
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 345
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: None
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
1000272, 103, 105, 1115401, 125, 1258, 168108130, 1717286, 2062660, 21258, 222, 2224504, 2258, 25, 313, 3215877, 3222897, 3222899...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1964 - American Motors American L - United States 6 Cyl 3.8L 232

Wix
  • WIX Spin-On Lube Filter
  • Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.660
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 345
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: None
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1964 - American Motors Classic L - United States 6 Cyl 3.8L 232

Wix
  • WIX Spin-On Lube Filter
  • Cast Iron Engine; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.660
    • Duty Type: Hd
    • Micron: 10.00
    • Flow Rate: 1-3 Gpm
    • Style: Spin-on Lube Filter
    • Class: Ha
    • Burst Pressure: 380
    • Bypass Relief Valve Setting: None
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: No
  • WIX HD Oil Filters provide superior engine protection with high quality, high capacity media for applications such as medium and heavy trucks, farm, construction, mining, and other equipment. WIX filters are recommended for OEM oil and filter change intervals. High strength, corrosion-resistant cans, center tubes, and end caps with superior sealing components ensure a leak resistant, long-lasting, high performing oil filter under all types of operating conditions.

This Part Fits the Following OEM/Substitute Numbers:
0 451 202 001, 0 451 202 055, 00013505050, 039301, 068 147, 079111, 1 032 015, 1 900 377, 1-13224-008-90, 10.15.03/110, 1032015M91, 104397A, 1050, 1069954M91, 1069954M92, 1116305, 117, 1200698...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1964 - American Motors Classic L - United States 6 Cyl 3.8L 232

Mr Gasket
  • 6 piece 5/16 in.-18 x 0.75 in.; 18 piece 1/4 in.-20 x 0.5 in.
  • Oil Pan Bolt Kit; 6 piece 5/16 in.-18 x 0.75 in.; 18 piece 1/4 in.-20 x 0.5 in.;
  • Oil Pan Bolt Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size:
      • Amc V8
      • Ford Small Block
  • Features:
    • Ideal For Tight Spaces
    • Serrations Prevent Loosening
    • Flange Distributes Pressure
    • Zinc Plated Bolts
    • Grade 5 Material
    • Easy Installation
  • The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Additional Fitment Information:
Vehicle
1964 - American Motors Ambassador

Mr Gasket
  • 6 piece 5/16 in.-18 x 0.75 in.; 18 piece 1/4 in.-20 x 0.5 in.
  • Oil Pan Bolt Kit; 6 piece 5/16 in.-18 x 0.75 in.; 18 piece 1/4 in.-20 x 0.5 in.;
  • Oil Pan Bolt Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size:
      • Amc V8
      • Ford Small Block
  • Features:
    • Ideal For Tight Spaces
    • Serrations Prevent Loosening
    • Flange Distributes Pressure
    • Zinc Plated Bolts
    • Grade 5 Material
    • Easy Installation
  • The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Additional Fitment Information:
Vehicle
1964 - American Motors Ambassador
Showing 1 - 10 of 19 products

Loading...