1997 Jeep Yukon Gear Parts

Choose a Model for your 1997 Jeep

Cherokee Grand Cherokee TJ Wrangler

Showing 1 - 10 of 46 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1997 Jeep Cherokee Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Rear Axle Bearing/Seal Kit for Various Differentials
8.2 in./8.5 in. 10 Bolt; AMC 35 Reverse/AMC 35/AMC 20; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles AMC Model 35; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 1 Year Warranty Against Manufacturer Defects
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.

Additional Fitment Information:

Vehicle	Position	Drive Type
1997 - Jeep Cherokee	Rear	4WD

6 In Stock

$35.42 CAD

$42.50 CAD

Brand	Yukon Gear
Part #	Y11AK 1563
Condition	New
Warehouse	B

1997 Jeep Wrangler Drive Axle Shaft Assembly - Front Yukon Gear

Yukon Chromoly Front Axle Kit; Dana 30; Both Sides; 27 Spline; 1310 U-Joints
4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints Dana 30 Front Axle Kit; 4340 Chrome-Moly Shafts; 27 Spline Inner and Outer Axles; Spicer U-Joints; and Disconnect Block Off Kit with Axle Seals~Dana 30; Crush Sleeve Design; 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
Axle Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Jeep Wrangler And Cherokee Front w/Dana Spicer 30
- Front Axle Kit
- 4340 Chromoly Axles
- 27 Spline Inner Axles
- Includes Inner And Outer Axle Shafts w/Spicer U-Joints
Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

This Part Fits the Following OEM/Substitute Numbers:

ZA W24110

Additional Fitment Information:

Vehicle	Position
1997 - Jeep Wrangler	Front

5 In Stock

$1,445.14 CAD

$1,734.17 CAD

Brand	Yukon Gear
Part #	Y11YA W24110
Condition	New
Warehouse	B

1997 Jeep Grand Cherokee Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Rear Axle Bearing/Seal Kit for Various Differentials
8.2 in./8.5 in. 10 Bolt; AMC 35 Reverse/AMC 35/AMC 20; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles AMC Model 35; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles~Dana 44HD; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 1 Year Warranty Against Manufacturer Defects
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.

Additional Fitment Information:

Vehicle	Position
1997 - Jeep Grand Cherokee	Rear

6 In Stock

$35.42 CAD

$42.50 CAD

Brand	Yukon Gear
Part #	Y11AK 1563
Condition	New
Warehouse	B

1997 Jeep Wrangler Spider Gear Yukon Gear

Yukon standard open spider gear kit for Model 35 with 27 spline axles
Dana 35; 27 Spline; 1.560 in. Side Gear Bore AMC Model 35; Dana 35; 27 Spline; 1.560 in. Side Gear Bore~Model 35; Dana 35; Standard Open Spider Gear Kit; 27 Spline; 1.560 in. Side Gear Journal
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits AMC Model 35 Open Differential w/1.560 in. Side Gear Bore
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

This Part Fits the Following OEM/Substitute Numbers:

ZIKM35-S-27-1.5

Additional Fitment Information:

Vehicle
1997 - Jeep Wrangler

Brand	Yukon Gear
Part #	Y11YPKM35-S-27-1.5
Condition	New
Warehouse	B

1997 Jeep Cherokee Differential Carrier - Front 6 Cyl 4.0L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1997 - Jeep Cherokee	L	-	Front	6 Cyl 4.0L	4WD	242

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1997 Jeep Cherokee Differential Carrier - Rear 4 Cyl 2.5L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1997 - Jeep Cherokee	L	-	Rear	4 Cyl 2.5L	4WD	150

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1997 Jeep Wrangler Differential Carrier - Front 4 Cyl 2.5L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1997 - Jeep Wrangler	L	-	Front	4 Cyl 2.5L	150

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1997 Jeep Wrangler Differential Carrier - Rear 6 Cyl 4.0L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1997 - Jeep Wrangler	L	-	Rear	6 Cyl 4.0L	242

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1997 Jeep Wrangler Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
AMC 20; Timken Brand; Some Flanged Dana 44; Timken Brand; Some Flanged
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:

Vehicle	Position
1997 - Jeep Wrangler	Rear

Brand	Yukon Gear
Part #	Y11AK SET10
Condition	New
Warehouse	B

1997 Jeep Wrangler Spider Gear Yukon Gear

Yukon standard open spider gear kit for Dana 30 with 27 spline axles
Dana 30/Reverse; 27 Spline Dana 30; Crush Sleeve Design; 27 Spline~Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.