1998 Lincoln MagnaFlow Performance Exhaust Parts

Choose a Model for your 1998 Lincoln


Showing 1 - 10 of 17 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • Universal Performance Muffler - 3/3
  • Universal Performance Muffler - 3/3
  • Satin Finish Round Exhaust Muffler

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Lincoln Navigator V - 8 Cyl 5.4L 330

MagnaFlow Performance Exhaust
  • 2.25 in. Tubing; 2.25 in. Inlet/Outlet; Overall L-13.00 in.; W-4.375 in.; Conv L-13 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Heavy Metal Series Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Town Car V - Rear Left 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • 2.25 in. Tubing; 2.25 in. Inlet/Outlet; Overall L-13.00 in.; W-4.375 in.; Conv L-13 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Heavy Metal Series Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Town Car V - Rear Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • 2.25 in. Tubing; 2.25 in. Inlet/Outlet; Overall L-13.00 in.; W-4.375 in.; Conv L-13 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Heavy Metal Series Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Continental V - Rear 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Heavy Metal Series; Overall L-34.25 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct Fit Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Town Car V - Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Heavy Metal Series; 2.5in. Tubing; 2.5 in. Inlet/Outlet; Overall L-47 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Dual; Passenger Side
  • Direct Fit Catalytic Converter

This Part Fits the Following OEM/Substitute Numbers:
F85Z 5E212-GA

Additional Fitment Information:
Vehicle Block CC Position Engine Drive Type CID
1998 - Lincoln Navigator V - Right 8 Cyl 5.4L RWD 330

MagnaFlow Performance Exhaust
  • Universal Performance Muffler - 3/3
  • Universal Performance Muffler - 3/3
  • Satin Finish Oval Exhaust Muffler

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Lincoln Navigator V - 8 Cyl 5.4L 330

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Heavy Metal Series; Overall L-34.25 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: No
    • Heat Shield Attached: No
    • Overall Length: 34.250 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: Oem
    • Outlet Outside Diameter: Oem
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Converter Body Size: Oem
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Converter Quantity: 2
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
1W7Z 5E212-ZA, F5AZ 5E212-A, F6AZ 5E212-DB, F7AZ 5E212-CA, F8AZ 5E212-EA, YW7Z 5E212-BA

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Town Car V - Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Heavy Metal Series; Overall L-33 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: No
    • Heat Shield Attached: No
    • Overall Length: 33.000 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: Oem
    • Outlet Outside Diameter: Oem
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Converter Body Size: Oem
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Converter Quantity: 2
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
1W7Z 5E212-ZB, F5AZ 5E212-B, F6AZ 5E212-DC, F7AZ 5E212-CB, F8AZ 5E212-EB, YW7Z 5E212-BB

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1998 - Lincoln Town Car V - Left 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Heavy Metal Series; 2.5in. Tubing; 2.5in. Inlet/Outlet; Overall L-35.5in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Dual; Driver Side
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Body Width: 6.500 In.
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Body Length: 7.750 In.
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • Heat Shield Attached: No
    • Overall Length: 35.500 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Main Piping Diameter: 2.500 In.
    • Converter Body Size: Oem
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Converter Quantity: 2
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
F75Z 5E212-MC, F85Z 5E212-CC, F85Z 5E212-EA

Additional Fitment Information:
Vehicle Block CC Position Engine Drive Type CID
1998 - Lincoln Navigator V - Left 8 Cyl 5.4L RWD 330
Showing 1 - 10 of 17 products

Loading...