1998 ICON Vehicle Dynamics Parts

Choose a Make for your 1998 vehicle

Lexus Toyota

Showing 1 - 10 of 42 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1998 Toyota Tacoma Suspension Lift Kit - Front and Rear ICON Vehicle Dynamics

Raises Front 0 (in) - 3 (in)
1995.5-2004 TACOMA 0-3" LIFT STAGE 1 SUSPENSION SYSTEM
95.5-04 TACOMA 0-3" STAGE 1 SUSPENSION SYSTEM
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics '96-'04 Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

Additional Fitment Information:

Vehicle	Position	Drive Type
1998 - Toyota Tacoma	Front and Rear	4WD

1 In Stock

$2,806.81 CAD

$3,368.17 CAD

Brand	ICON Vehicle Dynamics
Part #	I43K53011
Condition	New
Warehouse	B

1998 Toyota Tacoma Suspension Lift Kit - Front and Rear ICON Vehicle Dynamics

Rear Raise Height 1.5 (in) Raises Front 0 (in) - 3 (in)
1995.5-2004 TACOMA 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
95.5-04 TACOMA 0-3" STAGE 2 SUSPENSION SYSTEM
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 2 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

Additional Fitment Information:

Vehicle	Position	Drive Type
1998 - Toyota Tacoma	Front and Rear	4WD

2 In Stock

$3,817.91 CAD

$4,581.49 CAD

Brand	ICON Vehicle Dynamics
Part #	I43K53012
Condition	New
Warehouse	B

1998 Toyota Tacoma Coilover Spring and Shock Assembly - Front ICON Vehicle Dynamics

0" - 3" Lift Except 5 Lug Models
1996-2004 TACOMA/1996-2002 4RUNNER 2.5 VS IR COILOVER KIT
96-04 TACOMA/96-02 4RUNNER 2.5 VS IR COILOVER KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Adjustable Damping: No
- Service Parts:
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252004 - Economy Needle Charging Tool
  - 252010 - 2.5 Ifp Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
  - 611019 - Coilover Hardware Kit Pair
  - 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: 96-04 Tacoma/96-02 4runner 2.5 Vs Ir Coilover Kit
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!

Additional Fitment Information:

Vehicle	Position
1998 - Toyota Tacoma	Front

4 In Stock

$2,334.36 CAD

$2,801.23 CAD

Brand	ICON Vehicle Dynamics
Part #	I4358610
Condition	New
Warehouse	B

1998 Toyota Tacoma Leaf Spring Axle U-Bolt Kit - Rear ICON Vehicle Dynamics

Except 5 Lug Models
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
TOYOTA REAR 8.0" U-BOLT KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Grade Type: Performance
- Length: 8
- Title: Toyota Rear 8.0" U-bolt Kit
Features:
- Measures 8 inches in length
- Includes installation hardware
- For one axle
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.

Additional Fitment Information:

Vehicle	Position
1998 - Toyota Tacoma	Rear

11 In Stock

$119.83 CAD

$143.80 CAD

Brand	ICON Vehicle Dynamics
Part #	I4352050
Condition	New
Warehouse	B

1998 Toyota Tacoma Leaf Spring - Rear ICON Vehicle Dynamics

Except 5 Lug Models Requires Removal of Factory Overload Leaf
1996-UP TACOMA/2000-2006 TUNDRA 1.5" LIFT ADD-A-LEAF KIT
96-UP TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Title: 96-up Tacoma/00-06 Tundra 1.5" Add-a-leaf Kit
- U Bolts Included: Yes
- Bushings Included: No
Features:
- Kit lifts truck by 1.5 inches
- Uses high-quality progressive rate left springs smooth out your ride
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
This three-leaf progressive rate Add A Leaf Kit comes complete with u-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:

Vehicle	Position
1998 - Toyota Tacoma	Rear

14 In Stock

$364.47 CAD

$437.36 CAD

Brand	ICON Vehicle Dynamics
Part #	I4351100
Condition	New
Warehouse	B

1998 Toyota Tacoma Leaf Spring - Rear ICON Vehicle Dynamics

96-UP TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
Use Up To 33 (in) x 11.50 (in) Tires Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
1996-UP TACOMA/2000-2006 TUNDRA 1.5" LIFT ADD-A-LEAF KIT
96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Title: 96-up Tacoma/00-06 Tundra 1.5" Add-a-leaf Kit
- U Bolts Included: Yes
- Bushings Included: No
Features:
- Kit lifts truck by 1.5 inches
- Uses high-quality progressive rate left springs smooth out your ride
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
This three-leaf progressive rate Add A Leaf Kit comes complete with u-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
1998 - Toyota Tacoma	Rear	SR5	4WD

14 In Stock

$364.47 CAD

$437.36 CAD

Brand	ICON Vehicle Dynamics
Part #	I4351100
Condition	New
Warehouse	B

1998 Toyota Tacoma Leaf Spring Axle U-Bolt Kit - Rear ICON Vehicle Dynamics

These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
TOYOTA REAR 8.0" U-BOLT KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Grade Type: Performance
- Length: 8
- Title: Toyota Rear 8.0" U-bolt Kit
Features:
- Measures 8 inches in length
- Includes installation hardware
- For one axle
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
1998 - Toyota Tacoma	Rear	DLX	4WD

11 In Stock

$119.83 CAD

$143.80 CAD

Brand	ICON Vehicle Dynamics
Part #	I4352050
Condition	New
Warehouse	B

1998 Toyota Tacoma Suspension Lift Kit - Front and Rear ICON Vehicle Dynamics

0" - 3" Lift Except 5 Lug Models
1995.5-2004 TACOMA 0-3" LIFT STAGE 1 SUSPENSION SYSTEM
95.5-04 TACOMA 0-3" STAGE 1 SUSPENSION SYSTEM
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics '96-'04 Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

Additional Fitment Information:

Vehicle	Position
1998 - Toyota Tacoma	Front and Rear

1 In Stock

$2,806.81 CAD

$3,368.17 CAD

Brand	ICON Vehicle Dynamics
Part #	I43K53011
Condition	New
Warehouse	B

1998 Toyota Tacoma Suspension Control Arm Kit - Front Upper ICON Vehicle Dynamics

Except 5 Lug Models
ICON tubular upper control arms feature 1026 DOM tube construction, PTFE-lined rod ends, and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
96-04 TACOMA/96-02 4RNR TUBULAR UCalifornia DJ KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Dom Steel
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: 96-04 Tacoma/96-02 4rnr Tubular Uca Dj Kit
- Control Arm Color: Black
- Bushing Material: Polyurethane
- Service Parts:
  - 614501 - 58400 Replacement Bushing And Sleeve Kit
  - 614519 - Delta Joint Install Press Adapter Tube
- OEM Wheels & Tires Fitment: Yes
Features:
- Direct bolt-in design makes for a simple and straightforward installation
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- CNC machined steel taper adapter
- 1026 DOM steel construction
- CNC bent and notched tubing
- Serviceable dual stage bushings
- CNC machined bushing housings and sleeves
- Built-In caster correction
- Black semi-gloss powder coat finish
- Delta Joint upper control arms carry ICON's exclusive 5 year limited warranty when used in a complete ICON suspension system
Through hours of in-house research and thousands of miles of real world testing, ICON engineers have identified the limiting factors of the 1996-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner OEM upper control arms and developed a kit to address these limits. Like all ICON tubular upper control arms, these are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. These arms are engineered with built-in geometry correction for optimal alignment specifications and increased caster for confidence inspiring handling. The robust, two piece steel taper adapter clamps from both sides of the spindle to distribute the extreme forces seen during aggressive off-road driving while CNC machining provides a precise, OE style fit for the Delta Joint taper pin. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

Additional Fitment Information:

Vehicle	Position
1998 - Toyota Tacoma	Front Upper

8 In Stock

$1,359.01 CAD

$1,630.81 CAD

Brand	ICON Vehicle Dynamics
Part #	I4358400DJ
Condition	New
Warehouse	B

1998 Toyota Land Cruiser Shock Absorber - Rear ICON Vehicle Dynamics

with 0 - 3 Lift Kit
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
91-07 LAND CRUISER 80/100 0-3" REAR 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 91-07 Land Cruiser 80/100 0-3" Rear 2.0 Vs Ir
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.